Repair
Repair Price: $ 940.00
Purchase
CSL Part Number: 69791
Product Overview: The Clamp and Knife Control I/O Board (Dexter Lawson 5MS-6007) is an input/output control module designed for paper processing and converting machinery. It manages clamp and knife operations, which are critical functions in equipment such as paper cutters, slitters, and packaging machines. The board features optically isolated inputs to protect against electrical noise and voltage transients common in industrial environments. It interfaces with sensors and actuators to coordinate precise timing of material clamping and cutting cycles. This type of I/O board is typically found in automated paper handling systems, corrugated box manufacturing lines, and tissue converting equipment where synchronized clamping and cutting operations are required.
Category: I/O Card & Modules
Manufacturer: Dexter Lawson
Manufacturer Part Number: 5MS-6007
Also Known As(AKA): 5MS6007
Please indicate operating problem when sending in for repair.
Common Failures
This unit may experience issues where input signals do not register properly. When observed, this typically indicates that the signal is not being processed as expected.
Repair Approach
Our evaluation process includes detailed testing to isolate the specific faulty component. Common repair solutions may involve replacing components such as opto isolators, capacitors, or diodes, particularly when corrosion or component failure is identified during inspection.
Testing & Quality
Following repairs, units undergo thorough testing, including diagnostic checks and burn-in tests, to verify that the repair was successful and the device is fully operational. These tests are a critical part of our quality assurance process.
Limited Repair
The Dexter Lawson part number is only available as a limited repair at our facility. Repairs to this item may be limited due to several reasons:
- Availability of parts
- Less than 100% test ability due to required support equipment
To have us attempt a repair on your Dexter Lawson part follow these steps:
Step 1 -
Click the Repair Now button above to add the part and complete the RMA form.
Step 2 -
Print the RMA form that is sent to your email, and put it in the box with the parts for repair.
Step 3 -
Mail the box to the address on the RMA.
After we receive your item, we will perform an inspection and an authorization to repair will be sent for your approval. Work will begin after your authorization is received.
Once the user has seen at least one product this snippet will be visible.