Fusion UV Systems P300MT UV Lamp Power Supply 3.9kVa 700mA DC
Repair
Repair Price: $ 1,640.00
Purchase
CSL Part Number: 88328
Product Overview: The Fusion UV Systems P300MT (also known as F300S-#6869) is a high-voltage DC power supply designed to drive UV curing lamps in industrial printing and coating applications. It delivers 700mA DC output at approximately 4kV with a 3.9kVa rating. This unit powers UV lamp systems used in paper converting, web printing, and other manufacturing processes requiring UV curing or drying. The power supply includes built-in lamp monitoring through photocell inputs and front panel test points for voltage and current verification.
Category: Power Supply
Manufacturer: Fusion UV Systems
Manufacturer Part Number: P300MT
Also Known As(AKA): F300S-#6869
Power supplies are tested with a minimum 4-hour burn-in, under load.
Common Failures
This product commonly experiences issues related to low power output and inoperative fan function. These problems are typically identified through diagnostic testing, which may reveal a faulty diode within the high voltage rectifier block.
Repair Approach
Repairs may include replacing the inoperative fan with a compatible substitute and replacing the high voltage rectifier block with a suitable alternative. In some cases, additional components are adjusted or replaced to restore proper operation and to address specific interlocks, such as the "Lamp Out" interlock.
Testing & Quality
Following repair, the product undergoes testing to confirm proper operation, including burn-in tests with various load configurations to measure current and voltage consistency. All repairs are reviewed to confirm adherence to quality standards before the repair process is complete.
Repair your broken Fusion UV Systems part
We can repair your Fusion UV Systems model P300MT .
Please note: our repair turnaround time may be longer than our standard lead times for this item.
Step 1 -
Click the green button above, "Repair Now," and add to your RMA.
Step 2 -
Print the RMA form that is emailed to you, and put it in a box with the parts for repair.
Step 3 -
Mail the box to the address on the RMA.
You will be sent an authorization for repair via email. Your approval is needed before any work is started.
Once the user has seen at least one product this snippet will be visible.