Repair
Repair Price: $ 772.00
Purchase
CSL Part Number: 31630
Product Overview: The Stored Energy Systems FCA12-10-2211U is a 12-volt, 10-amp automatic battery charger designed to maintain generator and standby power batteries in commercial and industrial applications such as schools and other facilities. It features adjustable boost and float voltage settings controlled by potentiometers, allowing customized charging profiles. The unit uses SCR-based power control circuitry and includes AC fail indication. It connects via ribbon cable between control and power boards and provides both charging and maintenance modes to prevent battery sulfation during long standby periods.
Category: Battery Charger
Manufacturer: Stored Energy Systems
Manufacturer Part Number: FCA12-10-2211U
Also Known As(AKA): SENS
Power supplies are tested with a minimum 4-hour burn-in, under load.
Common Failures
Common issues identified in units of this type include charging failures due to defective components such as open resistors, blown diodes, and faulty ribbon cables with corroded connectors. Problems with potentiometers affecting charge voltage regulation have also been observed.
Repair Approach
The repair process typically involves replacing defective components including fuses, power SCRs, potentiometers, and ICs as needed. Burned and corroded connectors and ribbon cables are replaced when necessary. Components that control charge voltage are addressed to resolve overvoltage conditions.
Testing & Quality
Following repairs, units undergo comprehensive diagnostic testing, including burn-in testing with appropriate test loads. Units are evaluated to confirm proper charging function and must pass all quality checks before being returned to service.
Service and repair your broken Stored Energy Systems part
We can repair your Stored Energy Systems model FCA12-10-2211U in our facility. Let our skilled technicians get your Stored Energy Systems back in operation quickly.
Step 1 - Click the green 'Repair Now' button above to add the part and then complete the RMA.
Step 2 - The RMA form will be sent to you via email. Print the RMA form and put it in a box with the item(s) for repair.
Step 3 - Ship or mail the box to the address listed on the RMA.
Once the user has seen at least one product this snippet will be visible.